No more lanyards though Sign of progress Demand exceeding provide 16
From ChevelureWiki
If you’ve grown tired about the standard black bike seat made via the manufacturer of your bicycle, deal with it with a custom bike seat cover. You can use any type of fabric and choose from any array of prints plus patterns to create your own unique look. The cover will too save your chair from rain and wear plus tear. You may customize your bike seat in in regard to one hour.
Trouble: Moderately Easy
Instructions
things you'll need:
1 Cut out exclusive 8-inch with 10-inch bit of tissue paper. Place the tissue paper on top of your bike saddle and trace the shape using any marker. It is easier to round the curve of the bike saddle with a marker. Don’t worry about precision. A rough pattern of the bike saddle is all you need.
2 Remove the tissue paper from the bike saddle plus put it flat on some perform table. Retrace the lines of the pattern making them smoother, if necessary. Bring a ½-inch seam along the external regarding the pattern. Fold the pattern inside half, so it is symmetrical.
3 Cut out the pattern using a pair of scissors. Cut along the external seam line.
5 Using the tissue paper as a manual, cut the fabric down to the size plus form regarding the tissue papers.
6 Flip the fabric, if required, so it yous wrong-part up. Cut 1/2–inch slits in the curve regarding the fabric, any place of three at each part of the fabric.
7 Pin a ¾-inch hem along the rim of the fabric. Place the pins at the best, bottom and at every side regarding the bike saddle and after that add more to fill in the gaps. Add as numerous straight pins as necessary to completely pin lower the other sections.
8 Sew along any hem along the edge regarding the fabric using any sewing machine . You will include ¾-inch funnel alongside the perimeter regarding the fabric when the hem remains complete. This yous wherever you will insert the drawstring.
9 Lay from a shoestring, lanyard or strip about elastic, so it is flat. Fasten a safety pin at the tip about the drawstring and employ it to support you thread the drawstring through the channel. A security pin will be easier to press through the channel besides the bare tip about any drawstring. You should possess sufficient of an opening to do this, except, if you do not, use any seam removal tool, which will permit you to remove any few seam lines to create an opening.
10 Pull the bike seat around the bike saddle till it is completely in place. Begin at the nose regarding the saddle and then move backwards to the rounded edge of the seat. Hold the bike chair to the saddle as you go. Readjust the padding like essential.
11 Pull the drawstring to tighten the bike cover above the seat. Operate a drawstring stopper or holder to guarantee it in location.
Tips & Warnings
Some range of prints and patterns are available at local fabric stores.
References
YouTube: Sew some Drawstring Bike Seat Cover
bike image by Byron Moore from website
Resources web site
Print Email Share
Comments
